Flotation Machines
Equipment
Working principle
The flotation machine is driven by an motor v-belt drive to rotate the impeller, generating centrifugal effect to form negative pressure, on the one hand, inhaling sufficient air to mix with the pulp, on the other hand, stirring the pulp to mix with drugs, while refining the foam, so that minerals bond above the foam and float to the surface of the pulp to form mineralized foam again. The height of the gate is adjusted to control the liquid level, so that the useful foam is scraped out by the scraper. When the flotation machine is working, with the rotation of the impeller, the pulp in the tank is sucked from the bottom of the tank to between the impeller blades, at the same time, the low-pressure air given in by the blower enters it through the hollow shaft and the air distributor of the impeller. After the slurry and air are fully mixed between the blades, they are pushed out obliquely from the upper perimeter of the impeller and are stabilized and oriented by the stator before entering the entire trough. The air bubbles rise to the bubble stabilization zone and, after an enrichment process, the bubbles overflow from the overflow weir and enter the bubble tank. The remaining slurry flows to the next trough until it finally becomes tailings.
Performance
Good wear resistance and long service life
30% reduction in energy consumption
HOW CAN WE HELP YOU?
Get in touch and we will help you.
Tel: +86 574 8720 0688
Fax: +86 574 8788 9071
E-mail: info@unisite.com.cn
UNISITE
